Avalue ESM-BYT Bedienungsanleitung PDF herunterladen (Seite 48)

ESM-BYT User’s Manual

48 ESM-BYT User’s Manual

Item

Option

Description

Terminal Type

VT100

VT100+

VT-UTF8

ANSI[Default]

Emulation: ANSI: Extended ASCII char set.

VT100: ASCII char set. VT100+: Extends

VT100 to support color, function keys, etc.

VT-UTF8: Uses UTF8 encoding to map

Unicode chars onto 1 or more bytes.

Bits per second

9600

19200

38400

57600

115200[Default]

Select serial port transmission speed. The

speed must be matched on the other side.

Long or noisy lines may require lower

speeds.

Data Bits

1[Default]

2

Data Bits.

Parity

None[Default]

Even

Odd

Mark

Space

A parity bit can be sent with the data bits to

detect some transmission errors. Even:

parity bit is 0 if the num of 1’s in the data

bits is even. Odd: parity bit is 0 if num of 1’s

in the data bits is odd. Mark: parity bit is

always 1. Space: Parity bit is always 0.

Mark and Space Parity do not allow for

error detection. They can be used as an

additional data bit.

Stop Bits

1[Default]

2

Stop bits indicate the end of a serial data

packet. (A start bit indicates the beginning).

The standard setting is 1 stop bit.

Communication with slow devices may

require more than 1 stop bit.

Flow Control

None[Default]

Hardware RTS/CTS

Flow control can prevent data loss from

buffer overflow. When sending data, if the

receiving buffers are full, a ‘stop’ signal can

be sent to stop the data flow. Once the

buffers are empty, a ‘start’ signal can be

sent to re-start the flow. Hardware flow

control uses two wires to send start/stop

signals.

VT-UTF8 Combo Key Support

Disabled

Enabled[Default]

Enable VT-UTF8 Combination Key Support

for ANSI/VT100 terminals.

Recorder Mode

Disabled[Default]

Enabled

On this mode enabled only text will be sent.

This is to capture Terminal data.

Resolution 100x31

Disabled[Default]

Enabled

Enables or disables extended terminal

resolution.

Legacy OS Redirection

Resolution

80x24[Default]

80x25

On Legacy OS, the Number of Rows and

Columns supported redirection.

Putty KeyPad

VT100[Default]

LINUX

XTERMR6

SCO

ESCN

VT400

Select Function Key and KeyPad on Putty.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare